MINYAK RINGAN (Dua TAHAP) PERS GW,PRES 1G,2G,3G,4G,

Pembakar seri PRESS GW,PRESS 1G,2G,3G,4G, mencakup jarak tembak dari 107 hingga 1660 kW dan telah dirancang untuk digunakan dalam instalasi sipil dengan dimensi rata-rata, seperti area bangunan dan grup apartemen besar atau untuk digunakan dalam aplikasi industri, seperti pabrik kecil atau menengah. Operasi adalah dua tahap; pembakar dilengkapi dengan kotak kontrol keselamatan pembakar berbasis mikroprosesor yang memasok indikasi operasi dan diagnosis penyebab kesalahan. Kepala pembakaran, yang dapat diatur berdasarkan output yang dibutuhkan, memungkinkan kinerja optimal memastikan pembakaran yang baik dan mengurangi konsumsi bahan bakar. Fitur utama dari pembakar ini adalah keandalannya karena konstruksinya yang sederhana dan kuat, yang memungkinkan pengoperasian tanpa intervensi pemeliharaan khusus. Perawatan yang disederhanakan dicapai dengan sistem slide bar, yang memungkinkan akses mudah ke semua komponen penting dari kepala pembakaran. Semua komponen kelistrikan mudah diakses hanya dengan melepas panel pelindung, sehingga menjamin intervensi cepat dan sederhana pada komponen.

Specification STATE OF SUPPLY

Specification STATE OF SUPPLY

Monoblock forced draught oil burner with two stage operation, fully automatic, made up of:
– Air suction circuit lined with sound-proofing material
– Fan with forward curve blades with high performance concerning pressure and air delivery
– Air damper for air setting
– Hydraulic ram for air damper control
– Starting motor at 2800 rpm, three-phase 400V with neutral, 50Hz (single-phase, 230V and 50Hz for the PRESS GW model)
– Combustion head, that can be set on the basis of required output, fitted with:
– stainless steel end cone, resistant to corrosion and high temperatures
– ignition electrodes
– flame stability disk
– Fan pressure test point
– Gears pump for high pressure fuel supply, fitted with:
– filter
– pressure regulator
– connections for installing a pressure gauge and vacuometer
– internal by-pass for single pipe installation
– Valve unit with two delivery oil valves on the output circuit
– Photocell for flame detection
– Microprocessor-based burner safety control box, with diagnostic function
– Slide bars for easier installation and maintenance
– Protection filter against radio interference
– IP 44 electric protection level.
Standard equipment:
– 2 flexible pipes for connection to the oil supply network
– 2 gaskets for the flexible pipes
– 2 nipples for connection to the pump
– 4 screws for fixing the burner flange to the boiler
– 1 thermal screen
– Instruction handbook for installation, use and maintenance
– Spare parts.

BURNER RIELLO P140-P200-P300-P450 T/G

MINYAK RINGAN (TIGA TAHAP) TEKAN P 200 T/G

BURNER RIELLO P140-P200-P300-P450 T/G

Seri burner PRESS T/G P140-P200-P300-P450 T/G mencakup jarak tembak dari 830 hingga 5340 kW. Tersedia dalam 4 model berbeda, pembakar ini sangat cocok untuk dicocokkan dengan boiler ruang bertekanan. Untuk karakteristiknya, mereka menemukan aplikasi di pabrik sipil besar untuk pemanasan rumah tangga atau aplikasi industri di mana beban termal berulang dan dapat diprediksi. Sistem eksklusif ram hidrolik, dengan 3 posisi yang dapat disesuaikan, mengatur bukaan damper, memungkinkan aliran udara sesuai dengan keluaran yang diperlukan: dengan cara ini stabilitas api dioptimalkan di setiap titik kerja, dengan pengaturan mikro tersedia. Pembakar dilengkapi dengan kotak kontrol keselamatan pembakar berbasis mikroprosesor yang memasok indikasi operasi dan diagnosis penyebab kesalahan.

Specification STATE OF SUPPLY

Monoblock forced draught oil burner with three stage operation, fully automatic, made up of:
– Air suction circuit lined with sound-proofing material
– Fan with forward curved blades high performance pressure levels
– Air dampers for air setting controlled by a three stage hydraulic ram
– Starting motor at 2850 rpm, three-phase 400 V with neutral, 50 Hz
– Combustion head, that can be set on the basis of the combustion output, fitted with:
– stainless steel end cone, resistant to corrosion and high temperatures
– ignition electrodes
– flame stability disk
– Gears pump for high pressure fuel supply, fitted with:
– filter
– pressure regulator
– connections for installing a pressure gauge and vacuometer
– internal by-pass for single pipe installation
– Valve unit with a oil safety valve and three oil delivery valves on the output circuit;
– Photocell for flame detection
– Microprocessor based burner safety control box, with diagnostic function
– Burner on/off switch
– Flame inspection window
– Slide bars for easier installation and maintenance
– Protection filter against radio interference
– IP X0D (IP 40) electric protection level.
Standard equipment:
– 2 flexible pipes for connection to the oil supply network
– 2 nipples for the connection to the pump
– 4 wiring looms fittings for electrical connections
– 4 screws for fixing the burner flange to the boiler
– 2 slide bar extensions (for the extended model of P 300 T/G and P 450 T/G)
– Gasket for flange
– 1 Star Delta starter (On models where provided)
– Diffuser disk (P 450 T/G)
– Instruction handbook for installation, use and maintenance
– Spare parts catalogue.